Epi-2500

8-10% Foil saving in Print Registration Control

SALIENT FEATURES

  • Edge - to- edge cutting saves 6mm foil
  • Inbuilt Print Registration Control and Non- Fill Detection
  • Pick - and- Place for Downstrem Automation
  • Separate embossing or perforation station
  • Recipe program through Man-machine Interface
  • Stainless steel cladding conforming to cGMO standards

TECHNICAL SPECIFICATIONS

MODEL EPI-2500
PVC BASE-FILM MAX. 218 mm
PVC FILM THICKNESS 0.25 mm
PVC REEL DIAMETER MAX. 440 mm
ALUMINIUM FOIL WIDTH MAX. 206 mm
ALUMINIUM FOIL THICKNESS 0.02mm -0.03mm
ALUMINIUM REAL DIAMETER MAX 220 mm
TOTAL FORMING AREA MIN. 25mm x 200mm
MAX.102 mm X 200mm
ADVANCE 100 mm
PACK LENGTH PUNCHED OUT 200mm
PACK WIDTH PUNCHED OUT 100 mm
FORMING DEPTH MAX. 16 mm
OUTPUT MAX. 300 PACKS PER MIN.
(DEPENDS UPON PACK SIZE
AND PRODUCT DIMENSIONS)
ELECTRICAL POWER CONSUMPTION 8 KVA. WITHOUT
AIR COMPRESSOR.

Shipping dimensions for basic machine

DIMENSIONS NET WT. GR. WT.
103" X 48" X 85" 1300kg 1600 kg

COMPRESSED AIR REQUIREMENT

200 liter/min at 6 bar

COOLING WATER REQUIREMENT

2 liter/min at 130 C to 160 C at 3 bar

POWER

(415 V Ac 3 phase + N+E50 Hz) other Voltages on request

POWER CONSUMPTION

7.5 kW Peak 6kW Average

PACKING MATERIALS

Base Film
PVC-opaque or transparent
PVC with PVdC coating
PVC with PE/PVdC

LIDDING MATERIAL

Tempered aluminium with heat
sealable lacquer or glassine paper.

IT IS RECOMMENDED THAT THE MACHINE IS INSTALLED IN AIR CONDITIONED PREMISES HAVING ROOM TEMPERATURE OF 22 0C TO 26 0C TO ENSURE EFFICIENT WORKING” NOTE: SPECIFICATIONS ARE INDICATIVE AND WE RESERVE THE RIGHT TO MODIFY THEM WITHOUT PRIOR NOTICE.

Previous ProductBackNext Product
We'd love to hear about our product.
Contact us